Replacement Door Slider Kit
Our unique sliding door system allows you to open and close your enclosure doors smoothly, whether they are connected to one of our modular systems or used independently.
If a door slider becomes damaged or worn over time, it can be replaced quickly and easily using this replacement kit.
Available Colours:
Choose from a range of colours to match your setup.
 
Installation Guide
Using the supplied hex key, remove the screws securing the acrylic slider cover.
Carefully lift off the acrylic cover using tweezers or a similar tool.
Remove the old sliding door by gently prying it out with tweezers or a similar tool.
Apply a small amount of petroleum jelly (Vaseline) or another suitable plastic-safe lubricant to the sides of the new slider to ensure smooth, friction-free operation if needed(we will pre-lubricate your doors, you can add more if needed).
Insert the new slider into the right-hand side of the connector, then reposition the acrylic cover.
Reinstall the acrylic cover using the original screws.
Slide the door back and forth several times to ensure it moves freely.
If the door feels stiff, slightly loosen the screws and test again. Apply additional lubricant if required.
Ensure the lubricant is applied only to the sides of the sliding door where it contacts the guide rails. Wipe away any excess lubricant.